Table of Contents
Advertisement
Appliance door
en
Tilt the condensate trough up and remove it (fig.
5.
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
■
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
Open the appliance door fully and refit the
1.
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
Close the appliance door fully.
2.
Slide each panel back in and make sure that it is
3.
sitting correctly at the bottom in the retainer (fig.
20
).
4.
%
5.
6.
7.
8.
).
!
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
Top oven – Fitting and removing the glass
panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (fig.
appliance door is secured in place. It cannot be
).
detached.
"
When the locking levers are open in order to detach the
appliance door (fig.
cannot snap shut.
:
Risk of injury!
■
Risk of injury!
Push each panel in at the top (fig.
Put the cover back in place and press on it until you
hear it click into place (fig.
Open the appliance door again fully.
Close the two locking levers on the left and right
(fig.
).
%
Close the appliance door.
), the hinges are locked. They
"
Warning
If the hinges are not locked, they can snap shut with
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
).
#
).
$
), the
!
Advertisement
Table of Contents
