Transform and Lighting (T&L) are two very mathematically intense processes. Combined, T&L radically enhance photo-realism to create worlds that come alive on your screen. NVIDIA GPUs use separate T&L engines so that each can run at maximum efficiency.
Page 4
HDTV and DVD and resolutions •Multiple video windows with hardware color space conversion and filtering •Video acceleration for DirectShow, MPEG-1, MPEG-2, and Indeo COMPREHENSIVE SYSTEM INTERFACE •AGP 4X support, including Fast Writes and Execute Mode •NTSC or PAL TV output (optional) •DVI digital output connector, support TMDS Panellink resolution up to SXGA (optional) OPERATING SYSTEM Support •Windows XP, Windows 2000, Windows ME, Windows 98 and Linux...
2. GeForce2 Ti Board Outline 2.1 GeForce2 Ti using DDR SDRAM (SP6600TI/32M, SP6600TI/32M-TV) 32M on board – 2Mx32 DDR SDRAM x 4 Power 2M*32 S-VIDEO Encode NVIDIA BIOS GeForce 2 2M*32 DB15 Encoder 14.318MHZ NOTE 1: TV output connector and TV encoder are reserved for optional...
2.2 GeForce2 Ti using DDR SDRAM (SP6600TI/64M, SP6600TI/64M-TV) 64M on board – 4Mx32 DDR SDRAM x4 64M on board – 2Mx32 DDR SDRAM x8 Power 4M*32 S-VIDEO Encode NVIDIA BIOS GeForce 2 4M*32 DB15 Encoder 14.318MHZ NOTE 1: TV output connector and TV encoder are reserved for optional...
3.Hardware installation 3.1 Package Contents 1. NVIDIA GeForce2 Ti 3D Accelerator card 2. CD title or Software diskettes 3. This manual 3.2 Installing the card Turn off your computer Remove the cover of the computer per the owner’s manual Install the card in the AGP bus slots...
3.3 Micro Cross DVI Connector System “Micro Cross:”/high speed pins; Analog Red Video Out Analog Green Video Out Analog Blue Video Out Analog Horizontal Sync Analog Common Ground Return (Red , Green , Blue Video Out) Main Pin Field: 1. TMDS Data 2- 2.
4. Smart Installation For Windows XP, Windows 2000, Windows 98, Windows ME 4.1 Put the DRIVERS CD in your CD-ROM 4.2 Click Driver installation 4.3 If everything fine, screen will show Confirm Installation window. Then Select OK...
Page 11
4.4 Now appears the Driver Confirmation window Select the Install If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”, still you can force to install. 4.5 Then restart your computer.
11. Then show Browse for Folder Select E:\drivers\ NVIDIA\6X00\WinXP Note: “E:”-> CD Drive, “NVIDIA”-> VGA chip brand name, “6X00”-> VGA model number Then select OK and then click Next 12. If no problem occur, system will start to install the driver 13.
5.3 How to Change Refresh Rate in Windows XP 1. Make sure that you have installed windows XP Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel 2. Inside the Control panel group , click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings choose Monitor 3.
5.4 NVIDIA Utility in Windows System 5.4.1 GeForce2 Ti Display Adapter Information Table, you can tell the BIOS and Drivers version, NVIDIA Chip model name, IRQ setting and many useful information. Additional properties is for advance user to setting OpenGL, DirectX and other settings.
5.4.2 Device selection Select output device, if all the optional connector is connected, you will be able to select DVI or TV output as Windows default display device. Geforce2 Ti do not support TwinView. Only the device is plugged and functional, then you will be able to check the selection box. If you plug the connector after window boot up, click Detect Displays will functional the plugged output device check box.
5.4.3 Color correction This Window shows NVIDIA Digital Vibrance is functional and you can adjust Brightness, Contrast, Gamma and save it as your favorite setting. If you don’t like your adjustments, you can also check Automatically apply these settings at startup to change it back.
Please select Brows 11. Then show Browse for Folder tab Select E:\drivers\ NVIDIA\6X00\Win9X (or \Winme) Note: “E:”-> CD Drive, “NVIDIA”-> VGA chip brand name, “6X00”-> VGA model number Then select OK 12. Then show Update Device Driver Wizard tab Select CD-ROM driver...
Select Change Now comes up a update drivers wizard window. Please follow the on screen instruction to go on. Please specify the drivers location at your CDROM:\drivers\NVIDIA\6X00\win2000 or the directory where you put your drivers Select Install and click “YES” when the Installing Driver dialog box appears. If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”,...
Page 19
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.