Table of Contents
Advertisement
English
received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See
Making a Talkgroup Call on page 62
Private Call (Trunking Only) on page 63
information on returning the call.
Sending a Call Alert Page
Do one of the following to send a call alert page:
NOTICE:
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is
left idle long enough for the time to expire. You hear
the Menu Inactive Exit Tone upon feature exit.
•
Sending a call alert page using the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a. Press the preprogrammed Quick Access (One-
Touch) Call Alert Paging button to send a page
to the preprogrammed ID.
The display shows Paging...<Number>.
84
or
Making a
for more
•
If the call alert page is sent successfully, you hear
a tone and the display shows Ack received.
The radio returns to the Home screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen for
Contacts.
Sending a call alert page using the radio menu
Page :
a.
or to Page .
b. Press the Menu Select button directly below
Page .
c. Press the Menu Select button directly below
Cnts to view the required ID,
required ID.
d. Press the PTT button to send the page.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you hear
a tone and the display shows Ack received.
The radio returns to the Home screen.
or
to the
Advertisement
Table of Contents
