Table of Contents
Advertisement
Replacing the Grass Deflector (continued)
6. Secure the rod and spring assembly by twisting it so that the short end of the rod is
behind the front bracket welded to the deck.
7. Install the cotter pin into the end of the rod.
The grass deflector must be spring-loaded in the down position. Lift the deflector up
to test that it snaps into the full-down position.
Cleaning
Disposing of Waste
Engine oil, batteries, hydraulic fluid, and engine coolant are pollutants to the environment.
Dispose of these according to your state and local regulations.
3464-637A
IMPORTANT
Page 5–33
Maintenance: Cleaning
Advertisement
Table of Contents
