Carrier DLFSOAH Installation Instructions Manual page 21

DLFSOAH: Installation Instructions
WIRELESS REMOTE CONTROL HOLDER
INSTALLATION
Boost
Fig. 50 — Wireless Remote Controller RG10L3
1. Use the two screws supplied with the wireless remote control to attach
the mounting bracket to the wall in a location selected by the customer
and within operating range.
2. Install the batteries in the remote control.
3. Place the remote control into the remote control mounting bracket.
NOTE: For remote control operation, refer to the remote control's
owners manual.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
OPTIONAL WIRED WALL-MOUNTED
REMOTE CONTROL INSTALLATION
NOTE: For setup instructions, refer to the Wired Controller
Installation Manual (KSACN0701AAA).
SYSTEM CHECKS
1. Conceal the tubing where possible.
2. Ensure the drain tube slopes downward along its entire length.
3. Ensure all tubing and connections are properly insulated.
4. Fasten tubes to the outside wall, when possible.
5. Seal the hole through which the cables and tubing pass.
INDOOR UNIT
1. Do all remote control buttons function properly?
2. Do the display panel lights work properly?
3. Does the air deflection louver function properly?
4. Does the drain work?
Explain Following Items To Customer (with the aid of the
Owner's Manual):
1. How to turn the air conditioner on and off; selecting COOLING,
HEATING and other operating modes; setting a desired temperature;
setting the timer to automatically start and stop the air conditioner
operation; and all other features of the remote control and display
panel.
2. How to remove and clean the air filter.
3. How to set the air deflection louver.
4. Explain care and maintenance.
5. Present the owner's manual and installation instructions to customer.
21