Table of Contents
Advertisement
DLFSOAH: Installation Instructions
NOTE: The corresponding colors or pins are connected to each other.
(white 10-core)
(red 5-core)
when the connection is complete,
clip the wires to the strap.
Fig. 35 — Panel Installation
6. Install the control box cover and turn the disconnect switch to ON, then
close the two plastic covers on both sides of the panel.
Fig. 36 — Panel Installation
7. During the test-run process, the display illuminates and the air grille
raises automatically.
Fig. 37 — Panel Installation
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Model B
1. Press the circular position to open the two screw covers, then remove
the two screws.
(white 5-core)
( 4 core)
2. Hold and open the air grille, then push both latches to the middle to
unlock the air grille.
3. Remove the panel grille from the panel, secure the cassette panel to the
one-way cassette with the two plastic straps.
17
Screw Covers
Fig. 38 — Panel Installation
Latch
Fig. 39 — Panel Installation
plastic strap
Fig. 40 — Panel Installation
Advertisement
Table of Contents
