Table of Contents
Advertisement
DLFSOAH: Installation Instructions
4. Manually rotate the louver, secure the panel to the cassette with
3×M4*22 screws and a ST3.9*16 screw.
M4*22 screw
NOTE:
Eight M4*22 screws are supplied,
two of which are spares.
Two ST3.9*16 screws are supplied,
one of which is a spare.
Before securing the screw, open the screw cover.
After securing the screw, close the cover.
Fig. 41 — Panel Installation
5. Open the two covers on both sides of the panel, secure the panel to the
cassette with 3× M4*22 screws.
M4*22 screw
Fig. 42 — Panel Installation
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
ST3.9*16 screw
18
6. Connect the display board to the main control board, up to four wires
are required to make the connection.
NOTE: The corresponding colors are corresponding pins are
connected to each other.
display panel
(white 10-core)
when the connection is complete, clip
the wires to the strap.
Fig. 43 — Panel Installation
7. Install the control box cover and set the disconnect switch to ON, then
close the two plastic covers on both sides of the panel.
Fig. 44 — Panel Installation
8. Re-install the air grille by pushing the latches to lock it and secure the
two screws, then close the two screw covers.
Fig. 45 — Panel Installation
louver
(white 5-core)
Wifi
(4 core)
Advertisement
Table of Contents
