Buttons - La Crosse Technology V23 Setup Manual

BASICS

Buttons

1. ALERTS: Hold to enter Alert Settings. Press to confirm and move to next item. Use the
to arm or disarm an alert, and to adjust alert values.
2. WIND: Press to view Wind Speed History. While viewing, hold the
history value. Hold the
3. SET: Press to view Wi-Fi status. Hold to enter the Settings Menu.
4. PLUS/MINUS (+/-):
5. TEMP: Press to view Temperature & Humidity History. While viewing, hold the
history value. Hold the
6. LIGHT: Press to adjust backlight or to exit settings. Hold to enter Auto-Dim settings.
7. EXTRA SENSOR ( ):
delete the sensor. Hold the
8. EXTENDED FORECAST (
9. WIFI: Press during initial setup for Wi-Fi Connection. Hold to re-enter Configuration Mode and
clear previous Wi-Fi settings.
* Your display must be connected to Wi-Fi to receive Daily/Hourly forecast information.
Front of Display
WIND button to search for the Glide Pro sensor.
Use to adjust values. When in Alert Settings, press to arm/disarm alert.
TEMP button to search for the Thermo-Hygro Sensor.
Tap to view sensor ID numbers. While viewing, hold the
EXTRA SENSOR ( )
): Tap to see Daily or Hourly Forecast. Hold to auto-scroll forecast data.*
MINUS (-)
button to search for new sensors.
Back of Display
+ or - buttons
button to reset the
MINUS (-) button to reset
MINUS (-) button
07