Buttons - La Crosse Technology V16 Setup Manual

BASICS

Buttons

1. LIGHT: Press to adjust backlight or exit menus. Hold to enter Auto-Dim settings.
2. ALERTS: Hold to enter the alerts setting. Use
3. TEMP: Press to view high/low records, heat index, and dew point. While viewing, hold the
(-) button to reset the history reading. Hold to search for Outdoor Sensor.
4. SET: Press to view Wi-Fi status. Hold to enter the Settings Menu.
5. PLUS/MINUS (+/-):
6. IN/OUT: Press to switch between Indoor/Outdoor Temperature & Humidity display or autoscroll.
7. FORECAST REFRESH*:
8. EXTRA SENSOR ( ):
the sensor. Hold to add sensors.
9. EXTENDED FORECAST (
Hold to select Percent or Amount of Precipitation reading.
10. WIFI: Press during initial setup for Wi-Fi Connection.
Hold to re-enter Configuration Mode and clear previous Wi-Fi settings.
07
* Your display must be connected to Wi-Fi to receive Daily/Hourly forecast information.
Front of Station
Use to adjust values.
Press to refresh Forecast Readings.
Press to view ID numbers. While viewing, hold the
)*: Press to change Forecast Times.
+/- buttons to turn alerts on/off.
Back of Station
MINUS
MINUS (-) button to delete