Station Settings; Buttons - La Crosse Technology CA79103v2 Setup Manual

BASICS

Station Settings

1. When the station is first powered on, it will
search for the sensors which will connect
within 10 minutes.
Note: The Water Leak sensor will show in place
of the Pressure reading.
2. To manually set your language, time, date and
other settings, hold the button to enter the
Settings Menu.
Settings Menu Order
Greeting • Language • Beep ON/OFF
Hour • Minute • Year • Month • Date
(Month/Date or Date/Month) • Celsius/Fahrenheit
Pressure Units (hPa/InHg) • Pressure Number Setting
Notes
Important: Language and units of measure seen on you station are
not controlled in the app. Please use the Settings Menu to adjust.
• When a language is selected, the following instructions and
weekday will be presented in that language.
• Weekday will set automatically after year, month, and date
settings are adjusted.
• When in 24 hour time format, seconds will show in place of AM/PM.
• If you're connected to the Wi-Fi, the time and date will automatically update from the Internet.
See pages 3-4 for more information.
Use the +/- buttons on the
top of the station to adjust
the values.
Press the button to confirm
selection and move to next
• 12/24 Hour Time
step.
• Calendar Order
You may exit the Settings
Menu at any time by pressing
the button.
BASICS

Buttons

2
1
3
1. LIGHT ( )
Press to adjust backlight.
Hold to enter Auto-Dim
settings.
4. SET ( )
Press to view Wi-Fi status.
Hold to enter Settings Menu.
7. HOURLY FORECAST (
Press to see Hourly Forecast*
* Your display must be connected to Wi-Fi to receive Hourly/Daily
forecast information.
07
4 7
6 8
5
2. TEMPERATURE ( ) 3. EXTRA
Press to view Temperature
and Humidity History. While
viewing, hold MINUS button to
delete the history reading.
5. PLUS/MINUS (+/-) 6. ALERTS
Use to adjust values. In Alert
Settings, press to turn Alert(s)
on/off. Hold both together to
search for Wi-Fi signal.
) 8. DAILY FORECAST ( ) 9. WIFI
Press to see Daily Forecast*
9
Back View
Press to toggle through extra
sensors and pressure. Hold to
add sensors. While viewing,
hold the MINUS button delete
the sensor.
Hold to enter Alert Settings.
While in Alert Settings, press
to move to next Alert.
Press to search for Wi-Fi
signal. Hold to delete the
currently saved network
sign-on information and
search for a new Wi-Fi 08
signal.