Cable Box - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Cable Box
Before connecting a cable
box, see "Using
CableCARD" on page 52.
Your cable company scrambles all channels, which requires you to use a
cable box.
You do not have a VCR. (If you have a VCR, see pages 35 and 36.)
i i ili! ! i
Use the LCD projection TV's relnote control to change channels
coming through the cable box to the LCD projection TV's VHF/UHF
jack. (You must first program the remote control for your specific cable
box.)
/_ With this connection, all channels come into the LeD projection TV
through your cable box and only one unscrambled signal is sent to the
LCD projection TV, so you cannot use the dual picture features. If some
of your channels are scrambled, but others are not, consider using the
"Cable Box and Cable" connection on page 31 instead.
Connect the CATV cable to the cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the LCD
projection TV's VHF/UHF jack.
Run Auto Program, as described in "Setting Up the LCD Projection TV
Channel List" on pages 54.
CATV cable
Coaxial cable
VHF/UHF
_ :HHHH,_ .... ......
IN
i i ¸ ii i i i i i ii i
Use the cable box Tune the LCD proiection TV to the channel the cable box is set to
(usually channel 3 or 4) and then use the cable box to switch
channels.
Set up the LCD projection TV remote control to Program the remote control. See "Programming the Remote
operate the cable box Control" on page 58.
box indicator lights up.
Prex.ent the accidenial switching of TV channels When using ihe cabie box the LCD proiection TV must stay on the
channel the cable box is set to (usually channel 3 or 4). You can use
the LCD projection TV's Channel Fix feature to lock in a specific
channel. For details, see "Using the Channel Menu" on page 102.
32