Video - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Video
No picture (screen not lit), no If your LCD projection TV does not turn on, and a red light keeps flashing, your
sound LCD proiection TV may need service. (.'all your local Sony Service Center.
Make sure the power cord is plugged in.
Press on the front of the LCD projection TV.
Press to cycle through the connected video sources.
Try another channel; it could be station trouble.
Dark, poor or no picture Adjust the option in the Video menu (see page 94).
(screen lit), good sound Adjust the option in the Video menu (see page 94).
Check the antenna/cable connections.
No color/dark picture/color is Adjust the option in the Video menu (see page 94).
not correct
Only snow and noise appear on Check the antenna/cable connections.
the screen Try another channel; it could be station trouble.
Press to change the input mode (see page 57).
Dotted lines or stripes Adjust the antenna.
Move the LCD projection TV away from noise sources such as cars. neon signs,
or hair-dryers.
Double images Using a highly directional outdoor antenna or a cable may solve the problem.
Set the to an appropriate value. The defanlt setting is . If
doubled images appear with , select the best value l¥om to (see page
109).
"Black box" on screen You have selected a text option in the Setup menu and no text is available. (See
page 108 to reset Setnp selections.) To turn off this feature, set the
option to If you were trying to select closed captioning, select
instead of :.
Black bands appear at the top Some wide-screen programs are fihned in aspect ratios that are greater than 16:9
and bottom of the screen (this is especially common with theatrical releases). Your LCD proiection TV will
show these programs with black bands at the top and bottom of the screen. For
more details, check the documentation that came with your DVD (or contact your
program provider).
Certain programs on DVD or The compression used by certain digital broadcasts and DVDs may cause your
other digital sources display a LCD proiection TV's screen to display less detail than usual, or cause artifacts
loss of detail, especially during (small blocks or dots, pixelations) to appear on your screen. This is clue to your
fast-motion or clark scenes LCD proiection TV's large screen and ability to show very fine detail, and is
normal for certain digitally recorded programs. Adjust the reality/clarity in the
DRC Palette menu (see page 96) to optimize the picture while viewing these
sources.
ii!
119