Connections Ioscesseasseicevtieoueturivawatuicinetelie Elisa Teincieaauns - Pioneer SX-337 Operating Instructions Manual

CONNECTIONS
AM loop antenna
Sooo GleG|
bl alae
mae
She
hs
TAT?
7
}
OUTPUT
' DL
wr
= er Reh
Ground Turntable CD player VCR
Grounding
Although grounding is not necessary for reception it is
recommended for protection against damage from lightning
if an outdoor FM antenna is used. Grounding is recom-
mended as well, to help reduce notsé and hum.
DANGER:
Never make the ground connection to a gas pipe as sparks could
cause the gas to ignite.
Audio input/output jacks of this unit are dull and tin-plated,
aiming at high quality.
Connecting the speaker cords
Cutter [2]
= = Speaker cord
Twist the strands.
a mm
Fe)
@) Push up
7 Insert
yen
PL Tr
Cassette deck
AM LOOP ANTENNA
® Set the antenna on a level surface, and point in the
direction that gives optimum reception.
® Do not install the antenna in locations where it
touches the cover of the receiver or other metal ob-
jects, or near a CD player, personal computer, or tele-
VISION set.
To AC
wal! socket
©) (0)
tEtES 444444 6 8
Audio adaptor (Ex,Graphic equalizer)
R
Speaker sys-
tem A
aah sys-
tem B
Connecting the input/output cords
When other stereo components are connected, note the following
instructions:
¢ Connect the plugs properly. Faulty connections can cause noise and
also breakdowns and failures.
¢ The white terminal is for the left channel and the red terminal is for
the right channel.
CAUTION ABOUT SPEAKER CONNECTIONS
When using either A or B:
® The speaker systems used should have an impedance of between
4 and 16 Q (SX-337), 8 and 16 Q (SX-227).
When using A and B simultaneously:
e The speaker systems used should have an impedance of between
8 and 16 Q.
¢ Be sure that connections are secure. Check to make sure that wires
do not protrude from their terminals.
* Do not allow the speaker cords to become shorted. Damage may
result to your unit.
¢ Do not attempt to simultaneously connect two sets of speakers to
a single side (A or B). When using two sets of speakers, connect one
set to side A and one set to side B.