Speaker Connections - Pioneer VSX-502 Operating Instructions Manual

CONNECTIONS
SPEAKER CONNECTIONS
NOTE:
Use speakers of impedance 8Q — 16Q.
Speaker cord connection
@® Push the lever up (or down).
@® Insert the cord.
® Pull the lever back.
P. ww
@
On
one I
*NOTE:
Use if you want to use additional power
amplifiers to boost center and rear
channels power output. Refer to page 13
for connection instructions.
NOTE:
When
connecting a super woofer system such as the Pioneer S-
W1000, connect it to the same speaker terminals (A or B) to which the
front speakers are connected. Connecting the front speakers and
super woofer system to terminals A and B respectively will result in
reduced volume from the front speakers.
Front (R) Super woofer Front (L)
11
<ARB1419>