1. Turn on the POWER switch of the unit. Also turn on
the power to the stereo components you wish to use.
2. Use the INPUT SELECTOR switches and tape monitor
switches as appropriate to select the desired program
source.
INPUT SELECTOR
|TAPE 2/ADAPTOR
switch
(MONITOR) switch
To listen to a tape on
the cassette deck
connected to TAPE
2/ADAPTOR jacks.
To listen to the
component connected
VCR/LINE
OFF
to VCR/LINE jacks.
To listen to TAPE 1/
3. Operate the appropriate stereo component to play
- back the program source.
4. Adjust the VOLUME control and the tone controls.
11
<ARB1233>