Asko TD75.C27X User Manual page 38

Cleaning and maintenance
Table continued from last page
INFORMATION!
The heat pump filter has to be correctly placed into its slot. Otherwise, the heat exchanger installed
inside the dryer may be clogged.
Cleaning the appliance exterior
Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not
use solvents or abrasive cleaners that could damage the appliance (please observe the
recommendations and warnings provided by the manufacturers of the cleaning agents).
Wipe all parts of the dryer with a soft cloth until dry.
INFORMATION!
Keep the area around the dryer clean and cool. Dust, heat, and humidity will extend the drying
time.
38
7
Rinse the filter under running
water and then dry it.
8
Insert the filter to the original
position.
9
Replace the condenser unit
into the housing. Rotate the
condenser unit lever down.
Reinstall the inside cover and
turn attachments to the
locked position.
Close the outer cover.