Asko TD75.C27X User Manual page 21

Connecting to the power mains
ELECTRIC SHOCK!
After installation, the dryer should stand still for two hours before it is connected to the power
mains.
Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely
accessible. The outlet should be fitted with an earth contact (in compliance with the relevant
regulations).
If you have a tumble dryer with a 3 phase connection, the connection must be carried out by a
qualified and authorized specialist.
Connection upon delivery
Information about your dryer is indicated on the rating (type) plate.
Use the type A differential current protection switch.
WARNING!
The dryer shall not be connected to the power mains using an extension cord.
INFORMATION!
Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or hair
dryer.
INFORMATION!
Any repair and maintenance pertaining to safety or performance should be done by trained
experts.
Coin operation
(Only available in some models)
The machine is prepared for coin operation.
Owner/distributor can find detailed informations in Service manual.
Such installation must be carried out by a qualified professional.
The coin meter shall be able to short circuit two signal lines for periods of up to 10 minutes.
This will allow the user to load the appliance, choose a program and start the program after inserting
the coins.
Installation and connection
21