Final Setup - Cambridge SoundWorks Newton II Series User Manual

FINAL SETUP
Power Connections
Insert the subwoofer enclosure's power cable into the
receptacle on the subwoofer enclosures input panel.
Then insert the AC plug into an AC outlet. Turn the
subwoofer enclosure's power switch
ON
sound system to verify the subwoofer produces bass
output. Advance the Bass Level control to the
10 o'clock position. Turn on your receiver and play a
CD or movie you know to have significant bass. Listen
for subwoofer output as you increase your receiver's
volume control up to a moderate volume level. If you
don't hear any output from the subwoofer, slowly
advance the subwoofer's Bass Level. If you don't get
any output, recheck your connections
11