Supermicro X13SCD-F User Manual page 80

Super X13SCD-F User's Manual
•
DNS addresses
Interface ID
Enter an ID for the device.
DAD Transmit Count
Enter a value for Duplicate Address Detection (DAD) Transmit Count. A value of zero
indicates the DAD is not performed. The default is 1.
Policy
Use this feature to set the Policy. The options are Automatic and Manual.
*If this feature is set to Manual, the following features will become available for
configuration:
Advanced Configuration
New IPv6 Address - Enter a new IPv6 address.
New Gateway Addresses - Enter a Gateway address.
New DNS Addresses - Enter a new DNS address.
Commit Changes and Exit
Select this feature to save the changes you've made and return to the upper configu-
ration page.
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper configuration page.
Save Changes and Exit
Select this feature to save the changes you have made and return to the upper configu-
ration page.
Trusted Computing

When a Trusted-Platform Module (TPM) device is detected in your machine, the following
information will display:
•
TPM 2.0 Device Found
•
Firmware Version
•
Vendor
80