Table of Contents
Advertisement
en Additional functions in the Home Connect app
ivity, the optimum fan setting is automatically switched
on. You can change the sensor sensitivity setting in the
Home Connect app.
¡ Factory setting: 3
¡ Lowest setting: 1
¡ Highest setting: 5
7.10 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
7.11 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
7.12 Switching on emotionLight Pro
You can switch on the emotionLight Pro independently
of the ventilation system.
Press
.
▶
7.13 Setting the emotionLight Pro colour
Note: You can find other emotionLight Pro colours and
brightness settings in the Home Connect app.
Press and hold
until the required colour is
▶
reached.
7.14 Saturation indicator
If the grease filters or odour filters are saturated, cor-
responding symbols flash after the appliance is
switched off.
Note: You can set the saturation indicator in the
Home Connect app depending on the filter used.
Additional functions in the Home Connect app
8 Additional functions in the Home Connect app
You can find these functions in the Home Connect app:
8.1 Automatic sensor system
The automatic sensor system activates the fan and indi-
vidually adjusts the fan performance.
8.2 emotionLight Pro
In the Home Connect app, you can select from a range
of atmospheric colours, completely independently from
the ventilation.
8.3 Performance profile
In the Home Connect app, you have the option to set
your personal performance profile. You can choose
between the noise-optimised or performance-optimised
performance profile.
1
Available depending on software version. Further information on availability can be found on the website.
8
Clean the saturated grease filters and, in doing so, ob-
serve the cleaning instructions in these instructions.
Change the saturated odour filters and observe the in-
structions in the accompanying instructions.
If odour filters can be regenerated, follow the instruc-
tions in the accompanying instructions.
7.15 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance is switched off,
for grease filters.
¡ After the appliance is switched off,
for odour filters.
Press
.
▶
a The saturation indicator is reset.
7.16 Selecting the favourites function
You can specify 2 favourites functions via the
Home Connect app and then select these on your ap-
pliance.
Requirement: The appliance is connected to
Home Connect.
To assign
functions, follow the instructions in the
1.
Home Connect app.
To select the favourites function 1, press
2.
To select the favourites function 2, press and hold
3.
.
7.17 Remote display
You can use the Home Connect app to set functions
for your appliance that are not illustrated on the control
panel. If you carry out a function for which there is no
display on the control panel, the remote display lights
up .
8.4 Filter saturation
You can set the saturation indicator in the Home Con-
nect app depending on the filter used.
8.5 Cooktop-based Hood Control
You can connect your appliance to a Home Connect-
compatible hob and, in this way, control the functions
of your appliance via the hob.
8.6 Fan run-on
The fan run-on removes remaining odours and is used
to dry the odour filter after the cooking process.
lights up white
lights up yellow
briefly.
1
Advertisement
Table of Contents
