Unloading Film - Pentax IQZoom80G Operating Manual

UNLOADING FILM
(Remove the film from the camera in the shade or by uang yoar body to shade the camen)
1. Rewinding the film
After you have exposed the last frame of the
roll, the lens retracts and the film rewinds auto¬
matically. After rewinding, the motor stops,
and [ 0 ] blinks as shown to indicate that the
film has been rewound.
• [ 0 ] blinks for approx. 5 sec. after the whole
film roll is rewound.
• A 24-exposure roll of film takes about 20 sec¬
onds to be rewound.
• The entire roll of film including the film
leader is always rewound into the cartridge
to prevent any part of the film being exposed
to light.
Id
2. Unloading the film
To unload the film, open the back cover, and
remove the cartridge from the chamber by pull¬
ing the top out first ,
Notes:
• Never open the back cover until the whole
film roll is rewound.
• The shutter may be released a frame or two
even after the specified number of frames
have been used up as indicated by the num¬
ber of shots shown on the film cartridge. If
this occurs, these extra frames may be lost in
processing.