Pentax IQZoom80G Operating Manual page 14

5. When [ ? J appears in the exposure counter
on the LCD panel, the film automatically
stops winding. Ensure that [
I
] apears on the
LCD panel.
6
. Tf
J
blinks on the LCD panel, it means
that the film is not properly loaded. Reload
the film again.
• When the main switch is turned OFF, the
number of frames or l f ] indication wHl re¬
main for 5 seconds on the LCD panel.
Film and Film Speed Setting.
• Use a DX-coded film with ISO rating from
25 to 1600. When any of these films are
loaded, the proper film speed is automati¬
cally set for the camera.
• Non-DX coded films cannot be used. If non
DX-coded film is used, the camera automati¬
cally set the film speed to ISO 25.
• A film with IS0400 film speed is recom¬
mended to get less image blur and to cover
more of photographic situations.
• Use high-speed films with ISO 800 or higher
mainly for shooting indoors or in dimly-lit
conditions.
• Use of negative color film (print film) is rec¬
ommended.
10