2. Place the film cartridge in the film chamber
by fitting its flat side on top of the rewind
shaft first and then top end into the camera.
3
. Pull the film leader out far enough from the
cartridge to reach the take-up spool. Align
the tip of the film with the film leader end
4. Close the back cover. The film automatically
advances to the first frame.
X
Slack No!
OFlat Yes I
Notes:
• Ensure the film is placed properly between
the film guides.
• If there is dirt on the film detector
turn
cannot be wound properly.
• Ensure the film is taut as illustrated on the il¬
lustration to the left. Take up any slack in
the film by pushing it back into the cartridge.
• If the end of the film leader is extrenaely
bent, straighten it or cut off the bent portion.
9