Discharging The Clippings - Toro 21385 Operator's Manual

Discharging the Clippings

Side-discharge or rear-discharge the clippings when cutting very tall grass.
WARNING
The blade is sharp; contacting the blade can result in serious personal injury.
Shut off the engine and wait for all moving parts to stop before leaving the operating position.
Side-Discharging the Clippings
If the bag is on the machine, remove it and insert the rear plug; refer to
Important:
Ensure that the rear plug is locked in place. To lock the plug, raise the rear deflector
(Figure 19), firmly push the plug in until it snaps into place behind the tabs, and rotate the lever on the
plug to the left (Figure
Note:
To unlock the plug, rotate the lever on the plug to the right.
Installing the Side-Discharge Chute
1. Unlock the side-discharge deflector (A of
2. Lift open the side-discharge deflector (B of
3. Install the side-discharge chute and close the deflector onto the chute (B, C, and D of
19).
Figure
Removing the Grass Bag (page
Figure 19
20).
Figure 20).
17
16).
g231918
Figure 20).