Table of Contents
Advertisement
Folding the Handle
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1.
Hold the handle while disengaging the handle
locks to avoid pinching your hands.
2.
Disengage the handle locks until you can move
the upper handle freely.
3.
Fold the handle forward either to the vertical
position or the fully forward position as shown
in
Figure
23.
Important:
Route the cables to the outside
of the handle locks as you fold the handle.
Figure 23
4.
To unfold the handle, refer to
Handle (page
5).
g189219
1 Unfolding the
21
Advertisement
Table of Contents
