Safety Instructions - Furuno PR-241 Installation Manual

SAFETY INSTRUCTIONS

The operator and installer must read the applicable safety instructions before attempting to install
or operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
Turn off the power at the
switchboard before beginning
the installation.
Fire, electrical shock or serious
injury can result if the power is
left on or is applied while the
equipment is being installed.
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
Use only the specified power
cable.
Fire or damage to the equipment
can result if a different cable is
used.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can occur.
Indicates a condition that can cause death or serious injury if
not avoided.
Indicates a condition that can cause minor or moderate injury if
not avoided.
Prohibitive Action
PR-241
Warning Labels(s)
Warning label(s) is(are) attached to the unit.
Do not remove the label(s). If a label is missing
or damaged, contact a FURUNO agent or
dealer about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
i
Mandatory Action
CAUTION
Ground the equipment to prevent
electrical shock and mutual
interference.
Observe the following compass safe
distances to prevent deviation of a
magnetic compass:
Standard
compass
0.85 m
Name: Warning Label 1
Type: 86-003-1011-3
Code No.: 100-236-233-10
Steering
compass
0.55 m