Table of Contents
Advertisement
4-1 Disassembly
i
ne
a.
Caution:
Disconnect the ECR from the external power source before disassembly.
in the text.
.
3. Remove four screws [c] and separate Upper
4-1-1
Upper Case Disassembly
Frame Ass' y C from Lower Frame Ass*y I. Pull
1. Lift off Printer Cover.
Upper Frame Ass*y
in the direction shown in
2. Remove three screws (C2, C3 and C4) on
Figure 4-2.
Upper Case and lift it up.
pulling
:
direction
3.
Remove connectors from the red and the white
connectors on Main PCB.
4.
Remove Upper Case.
1. Remove four screws [a] on Upper Frame
Assembly C and remove Cover A. See Figure
4-1, below.
Figure 4-2. Separating Upper Frame from Lower
Frame
Figure 4-1. Printer Disassembly
Advertisement
Table of Contents
