Zanussi VC9516 Instructions For The Use & Care page 18

Setting the Timer Control
Follow these simple steps:
A. TO SET THE TIMER TO SWITCH 'ON' AND 'OFF' AUTOMATICALLY
OPERATION NOTES
1. Make sure the electricity supply is
switched on.
2. Place food in oven.
3. Check that the clock shows the Push in and turn the inner section of the
correct time of day. knob (A) clockwise or anticlockwise
Adjust if necessary. as required.
4. Set the stop time. Turn the outer section of the knob (B)
(This must be set first). clockwise towards ¢yuntil the stop time
indicator (5) is at the time you wish the
food to stop cooking.
5. Set the start time. Turn the outer section of the knob (B)
anticlockwise towards (3 to bring
the start time indicator line (4) to the
time at which cooking is to start (The
area shows the cook time).
6. Set the oven control to the required The oven indicator light should be off.
temperature.
When the automatic timed period starts, the oven thermostat light will cycle on and
off as usual and the area will gradually disappear giving an indication of the cook
time remaining. When the cooktime has finished the area indicating completion of
automatic programme (7) will show LO |
17