Table of Contents
Advertisement
Selecting a Program
Selecting a Center
MODE
ome
Channel Mode
Page 22
CENTER MODE
I
Selecting a Sound Effect
The surround processor provides three types of sound effects.
"PRO LOGIC"
To playa source marked [X][bausy sumouno], The sound will be reproduced
through the front speakers, center speaker and rear speakers.
"3CH LOGIC"
To play a source marked DX] [bousy sunrouno) when you are not using rear
speakers. The sound is reproduced through the front speakers and center
speaker.
"HALL"
To play an ordinary stereo source with one of JVC's surround sound effects,
resembling acoustics such as those in a music hall, for example. The sound
is reproduced through the front speakers and rear speakers.
To select one of these programs, use the MODE button. Each time you press the button, one
of the surround program indicators will light up in the following cycle:
"PRO LOGIC" > "3CH LOGIC" > "HALL" > begins the cycle again
When you select PRO LOGIC or 3CH LOGIC program, you must also select a center channel
mode. The following modes are available:
"PHANTOM" _ Use this mode when no center speaker is used. The entire center channel is
reproduced through the front speakers. 3CH LOGIC doesn't have this mode.
"NORMAL"
__ Use this mode when the center speaker is smaller than the front speaker. The
bass frequencies in the center channel are reproduced through the front
speakers.
"WIDE"
Use this mode when the center speaker is as large as the front speaker. The
entire center channel is reproduced through the center speaker.
"OFP"
The center channel is muted.
To select one of these modes, use the CENTER MODE button on the receiver. Each time you
press the button, one of the center channel modes will appear in the display window in the
following cycle:
"PHANTOM" > "NORMAL" > "WIDE" > "OFF" > begins the cycle again
Advertisement
Table of Contents
