Table of Contents
Advertisement
SOME IMPORTANT POINTS TO REMEMBER ABOUT SETUP
• When you have more than one work station (display station or a printer) to
set up in a line and they will be connected together, always begin with the
work station. that will be connected directly to the system or 5251 Model 2
or 12.
Set up this work
station first.
Set up this work
station last.
station second.
• Do not attempt to set up more than one display station at a time, even
though they look alike.
• When you start the setup procedure, read each step slowly and carefully.
Be sure that you understand each step before completing it.
• It is unlikely that you will encounter any problems; but if you do, contact
your planner. If you are the planner, contact your IBM sales or service
representative.
4
This could be a system other than the System/38, or it could also be a 5251 Model 2 or 12
Display Station.
·
What Should Be Done Prior to Setup
3
Advertisement
Table of Contents
