Overview - Stihl FSA 200.0 Instruction Manual

English
2.2 Symbols used with warnings in
the text
WARNING
■ This symbol indicates dangers that can cause
serious injuries or death.
► The measures indicated can avoid serious
injuries or death.
NOTICE
■ This symbol indicates dangers that can cause
damage to property.
► The measures indicated can avoid damage
to property.
2.3 Symbols in Text
This symbol refers to a chapter in this
instruction manual.
3

Overview

3.1 Brushcutter and battery
1 2
3
6
5
4
#
20
#
23
21
22
4
The cover is part of the motor housing. Only remove the cover to install a Smart Connector 2 A and
store it safely for later re-installation. Always use the brushcutter with the cover or Smart Connector 2
A installed.
32
7
8
9
11
10
14
12
13
15
16
17
18
19
1 Locking lever
The locking levers hold the battery in the bat‐
tery compartment.
2 Battery compartment
The battery compartment holds the battery.
4
3 Cover
The cover is the placeholder for a Smart Con‐
nector 2 A.
4 Air filter
The air filter filters the air entering the engine.
5 Carrying strip
Perforated strip for suspending the carrying
system.
6 Control handle
The control handle is used for operating,
holding and guiding the brushcutter.
7 LEDs
These LEDs indicate the selected power
level.
8 Power setting button
The power setting button is used to select the
power level.
9 Trigger lockout
The trigger lockout unlocks the trigger.
10 Trigger
The trigger switches the brushcutter on and
off.
11 Unlock button
The unlock button is used to turn on the
brushcutter.
12 Wing screw
The wing screw secures the handlebar to the
handle support.
13 Handlebar
The handlebar connects the control handle
and the handle to the shaft.
14 Handle
The handle is for holding and guiding the
brushcutter.
15 Shaft
The shaft connects all components.
16 Opening for the stop pin
The opening for the stop pin accommodates
the stop pin.
3 Overview
0458-040-9601-A