Table of Contents
Advertisement
Function Operation
Security
@ Lock level
€) New lock code
€B PIN on/off
GB New PIN
€B New PIN2
E) Fixed dial
SE)
There are three types of security code for your telephone:
Lock Code: Controls telephone security. Factory-set to "0000".
PIN: Controls SIM security.
PIN2: Controls security for Fixed Dial Memory and call charge metering.
It is recommended that you memorise your security codes. If you forget them
contact your dealer for the lock code or your service provider for PIN and PIN2.
Lock Level
@
FULL LOCK: Prohibits all outgoing calls.
PARTIAL LOCK: Prohibits all outgoing calls except those made from memory.
UNLOCKED: Switches off telephone security.
Emergency calls can be made and incoming calls may always be answered.
UE p
enter the lock code. Select a lock level by pressing V or (A), then
While the telephone is locked the selected lock level will be displayed during
standby. To restore normal operation to the telephone enter the lock code. When
the telephone is switched off and then on the previous lock level will be restored.
New Lock Code
Enter the current lock code. Enter a new lock code (four digits). Enter the new lock
code again.
PIN on/off
Enter the PIN. Press (9) to switch PIN on or off.
When the PIN is switched on it will be necessary to enter the PIN, followed by (°t,
every time the telephone is switched on.
25
Advertisement
Table of Contents
