Table of Contents
Advertisement
Function Operation
To
To
To
Function Operation
display the function menu press GB.
select a function press the associated function number.
leave the function menu press
and hold.
If a menu option is not available the function number is displayed as an "X" and
cannot be selected. This may be because the telephone is not in a service area, itis
being used in a mode that does not support that feature (hand-held/car mount) or the
SIM being used does not support that feature.
The current setting may be shown with an ">" in front of the option.
Call Meter
@ Call meter
Last call meter
EB Accumulated call meter
€B Price per unit
GB Call limit
If you are given call charge information by your service provider the remaining
charge units, during a call, and the call cost, when the call has ended, will be
displayed. Call times are indicated as:
hours (0-99), minutes (0-59), seconds (0-59) — HH:MM:SS.
When the SIM is changed any call meter information will be lost.
NOTE: Call charge information may not give an accurate reflection of the tariffs
charged by the service provider.
Current/Last Call
a sB
Al
16
The duration of the last call during standby and the current call during
conversation.
To see call charge information press (V) or (A).
I Calls
GB GB ES
The accumulated duration of all calls. Incoming calls are shown with ">" and
outgoing calls are shown with "<".
To see call charge information press (V) or (A). To reset the meter press (°=, then
select which timer to reset by pressing (V) or A), followed by (©). To reset the
timers enter the lock code, or to reset the call charge enter the PIN2 and press
(50,
Advertisement
Table of Contents
