Panasonic GSM EB-G500 Series Operating Instructions Manual page 22

Function Operation
Set Call Bar call bar type
Select "SET?" or "CLEAR?" by pressing (V) or (A), then (9%). Enter the password.
Press to update the call bar status with the network.
Call Bar Status
Press to check the call bar status, this may take a while to update.
To see further levels of call bar status, press (V) or (A).
Change Password
Enter the current password. Enter a new password (four digits).
Enter the new password again.
Press to update the new password with the network.
Divert Y)
€B Divert
All calls
63 If busy
EB No answer
GB Unreachable
€D Status
Divert is used to forward incoming calls to another telephone, not necessarily a
GSM telephone.
When updating or checking the status of divert the telephone must be registered
with a network.
1. ALL CALLS: Diverts all calls.
2. IF BUSY: Diverts if you are busy.
3. NO ANSWER: Diverts if you do not answer.
4. UNREACH: Diverts if you are out of service or switched off.
Set Divert call divert type
18
Select "SET?" or "CLEAR?" by pressing (V) or (A), then (95),
Enter the telephone number to which calls will be diverted, this can be recalled
from a memory. Press to enter the telephone number.
If you selected "NO ANSWER" press (V) or (A) to select a delay time (five to thirty
seconds in five second steps) then press (O.
Press to update the divert status with the network.