JVC GX-N7E Service Manual page 4

esi Shia Se acecne
_ and insert the power plug into the POWER jack at the same
i time.
" Notes:
_™ How to Install Viewfinder ©
MIC jack
(3.5 mm dia. stereo mini jack)
Mike plug
® Confirm that provided mike @ is fully inserted.
©
The power jack is exclusively for use with provided
mike @; do not insert other plugs into it.
Power plug POWER jack
Plug connector @ into the socket.
Note: Confirm
that viewfinder connector
@ is fully
plugged into the socket.
Viewfinder socket
Viewfinder guide
1
~4E
* @ Detach the end of grip band @® from the end fixed to
@With your right hand inside grip band ®, pull the
Loék button
@ HOW TO MAGNIFY THE IMAGE ON THE VIEW-
FINDER'S SCREEN
Slide the viewfinder @ outer case in the direction of the
arrow until it clicks into its locked position to magnify the
image on the viewfinder's screen. in B
Note: To bring the outer case back to the origina! position, Notch
press the lock button in and slide the case in the
opposite direction of the arrow until the case stops 5. e
at its original position. Outer Outer:
case case
Lock button Lock button
: the camera, and loosen the band.
end: to the left to tighten it, and then press the Velcro
Pieces together.
Notes:
®@ Confirm that the Velcro pieces are together firmly.
@ Looping the lens cap @ string around the grip band
® facilitates uncapping and capping the lens.
[4] HOW TO INSTALL THE CAMERA CABLE
iO) Align the key (24) on the camera connector of provided Proper connection
camera cable @ with the groove (01) in the camera
cable socket @
@® Insert the connector into the socket @.
Note: Never attempt to force the 10-pin rectangular
camera connector of provided camera cable @ into
the camera cable socket when the connector is posi-
tioned upside down.
Improper connection
@ When removing the camera connector, remove by
gripping the camera connector, not the cable.
— 5E —
Outer case
@Set the outer case to the A
or B position for the best
viewability,
A position:
Pull the outer case in the
direction of the arrow as far as
it goes,
5 position:
Hold the lock button in, and
Puli the outer case back
slightly, into the notch of the
button,
Camera connector
(10-pin rectangular)