Table of Contents
Advertisement
© Preparation
Shoot
patterns or other subjects and operate zoom, focus, iris control switch, VTR switch, etc..
Thus
make
sure that brightness, contrast, focus, size and location of the picture, iris indication,
VTR
start/stop indication are al! proper. Operate also the WHITE
BALANCE
SWITCH and make
sure that white batance indication
(LED indication on the CRT
mask area) is properly achieved.
Further reduce the camera supply voltage (12V input) and make sure that battery alarm indication
on the EVE is properly achieved when the voltage is below ca. 10.8V. |
8 | FINAL CHECK
high H. freq. direction)
Fig. 4-2 (A)
scope pattern, or
or resolution
Pattern is OK.
@
>
(No. 5550) 39E
40E (No. 5550)
oer s a wna
anaes a et
AS
Advertisement
Table of Contents
