Pioneer PD-7500 Operating Instructions Manual page 7

CONFIRM SUPPLIED ACCESSORIES
PUT BATTERIES INTO REMOTE
CONTROL UNIT
@ Output cable
@ Size AAA/ROS dry cell batteries « 2
@® Remote control unit
® The remote control unit and batteries are located behind
the foam packing.
@ Control cord
PD-7500 (U.S., Canadian and Australian models)
PD-6500 (U.S. and Canadian models)
Open the lid of the battery compartment on the rear of the remote
control unit, and insert the batteries, taking care to align the (+)
and (—) polarities correctly.
NOTE:
© In order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period fone
month or more). In the event of battery leakage, carefully wipe
y battery fluid inside the compartment, and replace the
5 with new ones,
® Do not allow books or ather objects to rest on top of the re-
mote control unit, since the buttons may be depressed, caus-
ing faster exhaustion of the batteries.
improper use of batteries can cause dangerous leakage or rupture.
Be sure to observe the following safety points:
@ Insert batteries with positive (+) and negative (—) polarities
aligned correctly as shown inside the battery compartment.
@ Do not use a new battery together with one which has already
been used.
®@ Even batteries of the same type may have differing voltages de-
pending on the manufacturer. Do not mix different types of bat-
teries together.
7
<PRB1127>
En