Pioneer PD-7500 Operating Instructions Manual page 6

CONNECTIONS
Output cable
Power cord
Control cord
CD-DECK SYNCHRO cord
Optical fiber cable
®? (8
Os
Stereo amplifier
CO-DECK
SYNCHRO
CONNECTING THE OUTPUT CABLE:
Connect the plugs on one end of the cable to your amplifier's in-
put terminals (CD or AUX), and those on the other end to the out-
put terminals on this CD player.
@ When connecting the cord, insert the white plugs into the left
{L) channel, and the red plugs to the right (R) channel.
® Be sure to connect all plugs fully into their terminals.
CONNECTING THE POWER CORD:
CONNECTING THE OPTICAL FIBER CABLE:
NOTE:
® Use an optical fiber cable 10 feet (3 m) or less.
® Avoid the optical fiber cable plug being scratched or exposed
to dust. If there is dust, wipe off with a soft cloth.
® When an optical fiber cable is not connected, piace the dust cap
on the optical terminal (OPTICAL).
6
<PRB1127>
En
REMOTE CONTROL AMPLIFIER OPERATION:
PD-7500 (U.S., Canadian and Australian models)
PD-6500 (U.S. and Canadian models)
if your amplifier features the BR mark, connect the accessory con-
trol cord between the Amplifier's CONTROL OUT terminal and the
CD player's CONTROL IN terminal.
® You can then use the remote control unit furnished with your
amplifier to perform PLAY, PAUSE, STOP and TRACK opara
tions on the CD player.
® For details regarding connection and operation, consult the Oper
ating Instructions accompanying your stereo amplifies
® These terminals do not need to be connected if you de nat in
tend to use this function.
NOTE:
®@ When the control cord is connected to the CONTROL IN termi
nal, the remote control unit cannot 6e used to control the play
er directly. The remote contro! unit must be pointed ai the
amplifier's remote sensor.
®@ Be sure t6 connect both of the contral cord's plugs securely to
the CONTROL IN and CONTROL OUT terminals. Do not connect
only one end of the cable.
@ When only the digital output is connected, the remote sensor
of the amplifier does not function. To operate it, connect the
output cable to the stereo amplifier as well as connecting the
digital output.
About the CD-DECK SYNCHRO recording
function:
@ This function facilitates edit recording from CD to ca:
when the CD player is connected to a Pioneer cagsett
equipped with a CD-DECK SYNCHRO terminal. For detail
sult the Operating instructions accompanying the ¢
featuring the CD-DECK SYNCHRO mark.
@ When only the digital output is connected, the CD-DECK SYN
CHRO recording does not function. To operate it, connect the
output cable to the stereo amplifier as weil as connecting the
digital output.
te