Table of Contents
Advertisement
DEALER SET-UP INSTRUCTIONS
Assembly of this mower is the responsibility of the
Woods dealer. It should be delivered to the owner com-
pletely assembled, lubricated, and adjusted for normal
cutting conditions.
Complete Dealer Check Lists on page 34 when you
have completed the assembly.
The mower is shipped partially assembled. Assembly
will be easier if components are aligned and loosely
assembled before tightening hardware. Recommended
torque values for hardware are located on page 46.
Select a suitable working area. Open parts boxes and
lay out parts and hardware to make location easy.
Refer to illustrations, accompanying text, parts lists and
exploded view drawings.
WARNING
■ Before working underneath, carefully read
Operator's Manual instructions, disconnect
driveline, raise mower, securely block up all cor-
ners with jackstands, and check stability. Secure
blocking prevents equipment from dropping
due to hydraulic leak down, hydraulic system
failures, or mechanical component failures.
12, 15
3
6
19
10
13, 15
18
12, 15
13, 15
MAN0845
( 07/14/2023 )
ASSEMBLY
6
5
CD7748A
2
11
16, 17
1
Figure 28. Shipping Unit
■ Always wear relatively tight and belted clothing
to avoid getting caught in moving parts. Wear
sturdy, rough-soled work shoes and protec-
tive equipment for eyes, hair, hands, hearing,
and head; and respirator or filter mask where
appropriate.
Disassemble Shipping Unit
(Figure 28)
1. Remove all parts that are wired and strapped to
mower.
2. Remove wood blocks (1) and chain shielding (2) at-
tached to front of mower. Discard blocks.
3. Remove cap screws (12) and lock nuts (15) from
rear shipping bracket (3). Discard bracket.
4. Remove cap screw (14) and lock nuts (15) from
front shipping bracket (4). Discard bracket and re-
place hardware through PTO hanger (5), diagonal
braces (6), A-frame bars (7), U-link (8) and sleeve
(9). Do not over tighten lock nut against the PTO
hanger. PTO hanger should rotate freely.
10
4
13, 15
18
12, 15
13, 15
11
1
8
16, 17
7
9, 14, 15
CAUTION
1. Wood Blocks
2. Chain Shielding
3. Rear Shipping Bracket
4. Front Shipping Bracket
5. PTO Hanger
6. Diagonal Brace
7. A-Frame Bar
8. U-Link
9. Sleeve
10. Caster Arms
11. Hitch Arms
12. 1/2 NC x 1-1/2 HHCS
13. 1/2 NC x 4 HHCS
14. 1/2 NC x 6-1/2 HHCS
15. 1/2 NC Flange Lock Nut
16. 5/8 NC x 3-1/2 HHCS
17. 5/8 NC Flange Lock Nut
18. Lug
19. 1/2 NC x 4-1/2 HHCS
Assembly 29
Advertisement
Table of Contents
