STEP 1
Pay-Per-View/Phone Line Hookup
Please note that HTS 3600 is not intended for hookup of any phone which carries two separate phone lines
on a single 4-pin jack.
A) Connect the end of your phone cable into the phone wall outlet. Plug the other end into
the HTS 3600 "Phone In" jack.
B) Connect a second phone cable into one of the HTS 3600 "Phone Out" jacks and into the Pay-per-View
input on your DBS receiver or DVD player.
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW COMPONENT)
C) Connect a phone cable from the telephone wall jack to the HTS 3600 "Phone In" jack. Connect a second
phone cable from one of the HTS 3600 "Phone Out" jacks to the telephone.
From telephone
wall jack
Figure 1a
From telephone
wall jack
HOOKUP GUIDE
IN
OUT 1
OUT 2
PHONE
Figure 1
To DBS Receiver
Figure 1b
(or Telephone)
To DBS Receiver
(or Telephone)
To DVD Player
Figure 1b
(or Telephone)
To DVD Player
(or Telephone)
6