Hookup Guide - Monster Power HTS2500MKII Owner's Manual

STEP 1 DBS/Phone Hookup
FOR PAY-PER-VIEW DEVICES (SUCH AS DBS)
A) Connect one end of a phone cable into a telephone wall jack. Plug the other end into the HTS 2500
"IN" jack (figure 1a).
B) Connect a second phone cable from either the "OUT 1" or "OUT 2" jacks to the Pay-Per-View input on your
DBS receiver (figures 1b and 1c).
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW DEVICE)
A) Connect a phone cable from a telephone wall jack to the HTS 2500
cable from either the "OUT 1" or "OUT 2" jacks to the telephone (figures 1b and 1c).
Figure 1a
From telephone
wall jack

HOOKUP GUIDE

IN OUT 1
OUT 2
PHONE
Figure 1
"IN" jack. Connect a second phone
MKII
Figure 1b
To DBS receiver or telephone
Figure 1c
To DBS receiver or telephone
MKII
6