STEP 6
Analog Audio Filter Outlet (Switched) Hookup
NOTE
Because certain components don't need continuous power, or shouldn't be turned on continuously,
these outlets are "switched. " This means the components plugged into these outlets won't receive power or shut
down unless your PowerCenter is turned on or off. You can plug any type of low current audio component
(e.g., portable cassette player) or video component (e.g., camcorder) into the preamp or tape outlets.
A) Attach a Monster Power
color-coded PowerCenter outlet.
B) PREAMP/PROCESSOR: Plug the preamp's power cord into the HTS 3600's corresponding
PREAMP/PROCESSOR outlet.
C) A/V RECEIVER: Plug your AV receiver's power cord into the corresponding RECEIVER outlet.
GROUND
UNSWITCHED
Designed in U.S.A.
Manufactured
in Taiwan
11
ID label to each component's power cord before you plug it into the appropriate
®
UNSWITCHED
UNSWITCHED
SWITCHED
IN
OUT
CABLE TV
IN
OUT
AC IN
110V
TIMED
0.3A
SATELLITE
ANTENNA
IN
OUT
DC 3-30V
IN
OUT 1
OUT 2
PHONE
BREAKER 15A
1800W
PRESS TO RESET
MAX TOTAL