Hookup Guide; Dbs/Dvd/Phone Line Hookup - Monster Power HTS 5100 Owner's Manual

STEP 1

DBS/DVD/Phone Line Hookup

NOTE:
The PowerCenter is intended for hookup of a single phone line only. A second line will NOT be connected through
the phone line surge protector. You can use this feature as a phone splitter, however. If the "PHONE IN USE –
OUT 1" LED is on, the phone or Pay-Per-View device plugged into the OUT 1 outlet is in use and Monster's Access
Control Unit disengages the OUT 2 outlet. If the "PHONE IN USE – OUT 2" LED is on, the phone or Pay-Per-View
device plugged into the OUT 2 outlet is in use and Monster's Access Control Unit disengages the OUT 1 outlet.
FOR PAY-PER-VIEW DEVICES (SUCH AS DBS)
A) Connect one end of a phone cable into a telephone wall jack. Plug the other end into the HTS 5100
"IN" jack (figure 1a).
B) Connect a second phone cable from one of the HTS 5100 "OUT" jacks to the Pay-Per-View input
on your DBS receiver or DVD player (figures 1b and 1c).
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW DEVICE)
A) Connect a phone cable from a telephone wall jack to the HTS 5100 "IN" jack. Connect a second
phone cable from one of the HTS 5100 "OUT" jacks to the telephone (figures 1b and 1c).
Figure 1a
From telephone
wall jack

HOOKUP GUIDE

IN OUT 1
PHONE
OUT 2
Figure 1
Figure 1b
To DBS receiver, DVD player,
or telephone
Figure 1c
To DBS receiver, DVD player,
or telephone
6