Remove The 2242 Solid-State Drive And Bracket (For Selected Models) - Lenovo Slim 7i Hardware Maintenance Manual

Step 1. Disconnect the battery pack cable and the speaker cable from the system board. Pull out the
speaker cable. Then, remove the speakers.
Figure 5. Remove the speakers
Go to
https://support.lenovo.com/partslookup
replacement part:
Speaker

Remove the 2242 solid-state drive and bracket (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the 2242 solid-state drive and bracket by pulling them away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
30
Lenovo Slim 7i (14", 8) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following