Remove The 2280 Solid-State Drive (For Selected Models) - Lenovo Slim 7i Hardware Maintenance Manual

Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to
restore the profile from Lenovo cloud.
Go to https://support.lenovo.com/partslookup
replacement parts:
2242 solid-state drive
2242 solid-state drive bracket
2242 solid-state drive mylar

Remove the 2280 solid-state drive (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the 2280 solid-state drive and bracket by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 9. Disconnect the battery pack cable and remove the 2280 solid-state
Screw specifications
M1.6 × L1.7
Step 2. Remove the 2280 solid-state drive mylar.
32
Lenovo Slim 7i (14", 8) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following
Number of screws
1
to download the installation