Figure 5. Remove the battery pack
Screw specifications
M2 x L3.5
Go to
https://support.lenovo.com/partslookup
replacement part:
Battery pack
Remove the 2242 solid-state drive and bracket (for selected models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
Step 1.
Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the solid-state drive and bracket by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
30
Yoga 9i (14", 8) Hardware Maintenance Manual
Number of screws
5
to look up the Lenovo part numbers of the following