Remove The Camera Board - Lenovo Slim 7i Hardware Maintenance Manual

Figure 37. Remove the EDP cable
Go to https://support.lenovo.com/partslookup
replacement part:
EDP cable

Remove the camera board

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 41
"Remove the hinge cover (for LCD non-touch and OLED models)" on page 43
"Remove the LCD bezel (for LCD non-touch and OLED models)" on page 44
"Remove the LCD panel (for LCD non-touch models)" on page 47
Step 1. Disconnect the camera board cable.
52
Lenovo Slim 7i (14", 8) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following