Remove The M.2 2242 Solid-State Drive And Bracket (For Selected Models) - Lenovo IdeaPad 5i Pro Hardware Maintenance Manual

Remove the M.2 2242 solid-state drive and bracket (for selected models)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
Step 1. Disconnect the battery pack cable from the system board. Then, remove one screw and remove
the solid-state drive and bracket by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 9. Disconnect the battery pack cable and remove one screw and the solid-state drive and bracket
Screw specifications
M2 × L2
Step 2. Remove one screw and then remove the solid-state drive.
34
Lenovo IdeaPad 5i Pro (14",7) and Lenovo IdeaPad 5 Pro (14", 7) Hardware Maintenance Manual
Number of screws
1