Disabled System Indicator (Dsi) - Kenwood KDC-6011 Instruction Manual

4 Press the MENU button to end the menu mode.
Adjusting Time
Adjust the time.
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the mr button until the "CLK ADJ" appears in
the display.
Press the é<d button to search in the other direction.
3 Press either the AM or FM button for at least two seconds to
enter the Time Adjustment mode.
The hour display will blink.
4 © Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
e Adjusting the minutes
Press the PI button to advance the minutes, or press the
<@ button to make the minutes go back.
5 Press the MENU button to end the menu mode.
Disabled System Indicator (DSI)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for this
function is ON.
Turning Disabled System Indicator On/Off:
1 Press the MENU button for at least one second.
. "MENU' is displayed and the menu mode is turned on.
2 Keep pressing the mR button until the Disabled System
Indicator function. appears in the display.
Press the 4 button to search in the other direction.
— 29 —