Table of Contents
Advertisement
scrolling display of the titles.
¢ The setting of the text scroll function is in common with Radio
Text Scroll of the RBDS mode.
¢ Only units with a CD text feature permit title display.
{KDC-601 1/5011 only}
Disc Name Preset Play (DNPP)
Function of remote with DNPP button (See page 31)
!f you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
1 Press the DNPP button on the remote.
"DNP PLAY' will appear in the display, and the disc name preset
play mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
in any of the units that are connected, discs that have not been
disc name preset will display "NO NAME'.
¢ This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
¢ Discs in the disc changer that have never been played before.
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name. Also
note that "NO DISC' will be displayed when a disc has not been
_
loaded.
Rapid display (forward / reverse):
Press the DISC+ or DiSC— button.
Pressing the DISC-+ button will rapidly display the preset
names/disc titles in order."
—23—
Pressing the DISC— button will rapidly display the preset
names/disc titles in reverse order.
2 When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed wili be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
Advertisement
Table of Contents
